Skip to product information
Guitar is in good condition and shows minimal signs of use. Includes an aftermarket hard case.
Specs-
- Neck Taper (thickness) at the first fret is 17mm and 21mm at the 12th fret. (vs: 21.5 mm at the 1st fret and 23.5mm at the 12th fret for the standard AL-3000 model)
- The slim taper neck is preferred by some players
- Solid mahogany (not a multi-ply!) arch top body
- Triple bound body, and headstock. Single binding on neck.
- Improved Nickel plate hardware, including Nickel die-cast Grover tuners with 18-1 turning ratio for ultra fine tuning (Model 102-18N)
- Two Type V Alnico humbucker pickups for warm, traditional sound
- The AL-3000 now comes with improved wiring (single conductor braided 18 gauge American wire for pickups), improved pots (now higher voltage with brass shafts for reduced noise) and an improved pickup selector switch
- Two volume and two tone controls, plus a three way pickup selector switch
- One piece Mahogany set neck with 13.7" (350mm) radius neck for fast play and adjustable truss rod
-
Ebony fretboard with 22 and real Abalone Trapezodial inlays
- Individually hand filed frets for professional feel and playability
- Width of the neck at the nut: 1 5/8"; at the 21st fret: 2 3/16"
- Neck Taper (thickness) at the first fret: 17mm; at the 12th Fret: 21mm
- Overall length: 40"; Scale length: 24.7"
- Body thickness: 2" at edge; Width at the widest point: 13"
- Actual Weight is only 10 lbs